MATERIAL SAFETY DATA SHEET

SA-100

                                                             

 

1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY

PRODUCT NAMESA-100

COMPANY IDENTIFICATON: delaranrooz.co

EMERGENCY TELEPHON NUMBER:      +982166948831-66947491-66947522   

2. COMPOSITION/ INFORMATION ON INGREDIENTS

Hazardous   ingredient        CAS  No.      EC  NO.       Weight %      symbols     R phrases

                                                                                                   _                    Butyl glycol                    _           _

             Non hazarduse

3. HAZARDS IDENTIFICATION

          Safety Hazards : Flammable

          Human Health Hazards :Irritating to skin, eyes and respiratory system. Harmful if

          swallowed.

          Environmental Hazards:Annex 1 substance under review by the EU commission

        4.FIRSTAIDMEASURE 

Inhalation :          Remove to fresh air. If the victim has difficulty breathing or tightness of the chest, give  100%oxygenwith rescue breathing or CPR as required and transport to the nearest medical facility.

Skin Contact :Remove contaminated clothing. Immediately flush skin with large amounts of water for  at least 15 minutes, and follow bywashing with soap and water if available.

                

   Eye Contact:Immediately flush eyes with large amounts of water for at least 15 minutes while holding   

   eyelids open. Transport to the nearest medical facility for additional treatment.

  Ingestion:Do not induce vomiting, transport to nearest medical facility for

  additional treatment. If vomiting occurs spontaneously, keep head below hips to prevent aspiration.

  5. Fire and Explosion Hazard Data

                Flash Point :                                    62 ºC (Abel)

                Flammable Limits :                                       1.1 - 12.7 %V

               Auto Ignition Temperature :                       238 oC

               Chemical Reactivity :  Stable under normal conditions

    Extinguishing Media Water spray or fog, Dry chemical powder, Alcohol-resistant foam  and Carbon dioxide.

                                Materials to Avoid Strong oxidizing agents. Acids. Strong alkalis.

               Fire Fighting Additional Advice : Keep adjacent containers cool by spraying with water

               Protective Equipment :  Wear full protective clothing and self-contained breathing apparatus.

6. ACCIDENTAL RELEASE MEASURES

         Protective Measures :   Observe all relevant local and international regulations.

             Avoid contact with spilled or released material. Immediately

            remove all contaminated clothing. For guidance on selection of

            personal protective equipment see chapter 8 this Material

            Safety Data Sheet. Shut off leaks, if possible

without personal

                                                                   risks. Remove all possible sources of ignition in the surrounding

                                                                   area. Prevent from spreading or entering drains, ditches or

                                                                   rivers by using sand, earth, or other appropriate barriers.

Ÿ

                                                                  Take precautionary measures against static discharge. Ensure

                                                                  electrical continuity by bonding and grounding (earthing) all equipment.

 Clean-Up MethodswSmall spillage(< 200 LT) :    Transfer by mechanical means to a labeled, sealable container

for product recovery or safe disposal. Allow residues to evaporate or soak up with an appropriate absorbent  material and dispose of safely. Remove contaminated soil and dispose of safely.

     large spillage(> 200 LT) :   Transfer by mechanical means such as vacuum truck to a salvage tank for recovery                                                          or safe disposal. Do not flush away residues with water. Retain as contaminated waste. Allow

                     residues to evaporate or soak up with an appropriate absorbent

                     material and dispose of safely. Remove contaminated soil and

                     dispose of safely.

  Other Information :         Notify authorities if any exposure to the general public or the environment occurs                            oris likely to occur.

7. HANDLING AND STORAGE

         Handling :                      Avoid contact with skin, eyes, and clothing. Do not breathe

                                                       vapours. Extinguish any naked flame. Remove ignition sources.

                                                       Avoid sparks. Do not smoke. The vapour is heavier than air

                                                       spreads along the ground and distant ignition is possible.

                                                       Ensure electrical continuity by bonding and grounding

                                                       (earthing) all equipment.

                                                       Do not use compressed air for filling,

                                                       discharging, or handling operations. Handle and open container

                                                       with care in well-ventilated area. Do not empty into drains.

         Storage :                               Must be stored in a diked (bunded) well-ventilated area, away

                                                       from sunlight, ignition sources and other sources of heat. Bulk

                                                       storage tanks should be diked (bunded). Keep away from

                                                       aerosols, flammables, oxidizing agents, corrosives. Storage

                                                       Temperature: Ambient.

        Product Transfer :                  Keep containers closed when not in use. Do not use

                                                       compressed air for filling, discharging, or handling operations. If

                                                       positive displacement pumps are used, these must be fitted

                                                       with a non-integral pressure relief valve. Ensure electrical

                                                       continuity by bonding and grounding (earthing) all equipment.

        Recommended Materials :    For containers, or container linings use mild steel, stainless steel.

      Additional Advice:                 Containers even those that have been emptied, can contain

                                                      explosive vapours. Do not cut, drill, grind, weld or perform

                                                

                                                      similar operations on or near containers.

8. EXPOSIN CONTROL/PERSONAL PROTECTION

                  Exposure Standard :                       Occupational Exposure Limits                                                                                                         

                                                                     TLV-TWA = 20 ppm (121 mg/m3)8 Hours.

                                                                      TLV-STEL = 50 ppm (240 mg/m3)

                Engineering Controls Workplace :           Provide exhaust ventilation or other engineering controls to

                                                                                   keep the airborne concentrations of vapours below their

                                                                                   respective threshold limit value.

               Respiratory Protection :                              Vapor respirator. Be sure to use an approved/certified

                                                                                   respirator or equivalent. Wear appropriate respirator when

                                                                                   ventilation is inadequate.

              Hand Protection :                                 Butyl rubber gloves, Nature rubber gloves, Neoprene rubber

                                                                                  gloves, Nitrile rubber gloves.

              Eye Protection:                                          Chemical splash goggles (chemical monogoggles).

              Other Protection:                                       Use protective clothing which is chemical resistant to this

                                                                                 material. Safety shoes and boots should also be chemical

                                                                                 resistant.

                          

9. PHYSICAL AND CHEMICAL PROPERTIES

            Appearance :                       Clear liquid

            Odour :                                Slightly ether odour.

            Boiling Point (oC) :          171 ºC

            Melting Point (oC):           - 70 ºC                                                                                                                                                                                   

            Vapour Pressure (kPa) :      0.1 kPa @ 20 ºC

            Specific Gravity:              0.903 @ 20 ºC (ASTM D4052)

            Density (g/cm3) :             0.900 - 0.902 @ 20 ºC (ASTM D4052)

            Vapour Density :             4.1 @ 20 ºC (air = 1)

            Solubility in Water:            at 20 ºC or 68 ºF  Completely miscible. (ASTM D1722)

            Evaporating Rate :            0.08 (n-Butyl Acetate=1)

            pH Value:                               No data

10. STABILITY AND REACTIVITY

        

         Stability :                                              Stable under normal conditions of use.

         Conditions to Avoid :                            Heat, flame, spark and other ignition sources.

         Materials to Avoid:                               Strong oxidizing agents. Acid. Strong bases.

         Hazardous Decomposition Products : Thermal decomposition is highly dependent on conditions.

                                                                      Carbon monoxide, carbon dioxide and other organic compounds

                                                                      will be evolved when this material undergoes combustion or

                                                                      thermal or oxidative degradation. May form explosive peroxides.

          Hazardous Polymerisation:                 No.

11. TOXICOLOGICAL INFORMATION

             Acute Toxicity

                   LD50Acute oral toxicity :            470 mg/kg (rat)

                   LD50Acute dermal toxicity :     220 mg/kg (rabbit)

                   LC50Acute Inhalation Toxicity:  450 ppm/4 hours (rat                     

            Skin Irritation :          Irritating to skin.

                Eye Irritation :             Irritating to eyes

                Respiratory Irritation :        Inhalation of vapours or mists may cause irritation to the respiratory system.

          Carcinogenicity : No data available.